Hot Racing ERVT50M01 50t Mod 1 Steel Spur Gear E Revo 2 X-Maxx XO-1

SKU: SKU: 083745293180

• Description

  Hot Racing 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.

  FEATURES:

  - CNC machined hardened steel construction
  - Black oxide finished
  - Laser etched tooth count marking

  YOU WILL RECEIVE:

  - One (1) 50T, 1 mod steel spur gear

  REQUIREMENTS:

  - Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
  - With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.

  SPECIFICATIONS:

  - Overall diameter: 52.8mm
  - Gear face width: 8mm

  COMMENTS:

  - Upgrade for factory plastic 6448 or 6448X 54T spur gear

• Review