FLAT RATE SHIPPING * FREE DOMESTIC SHIPPING $499 & UP * Tel: 646.560.0909

vendor-unknown

SKYRC 380P INFRARED THERMOMETER

$39.95
Shipping calculated at checkout.



Description

Now you can take temperature measurements at a safe distance with SkyRC 380P, it provides accurate temperature readings from a safe distance, wherever indoor or outdoor.

SkyRC has engineered the 380P temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

Compared to its predecessor (ITP380), the 380P deploys a classic TO-46 housing thermopile sensor. The thermopile sensing element, composed of 116 elements of small thermocouples with an active area of diameter 545 μm on a silicon chip, absorb the energy and produce an output signal. It provides nearly Johnson-noise-limited performance, which can be calculated by its ohmic series resistance.

Every infrared thermometer has a "distance-to-spot" (D:S) ratio that tells you the diameter of the area being measured compared to the distance from the target.

The 380P thermometer has a distance-to-spot ratio of 6:1. That means it measures an approximately one-inch-diameter spot when it's 6 inches from the target (about 2.5 cm at 30 cm).

It means ITP380 thermometer can accurately measure targets at greater distances compared to many other thermometers; Distance-to-spot ratio is crucial to measuring! So be sure to measure at this D:S ratio.

Features:

  • Point, aim, tap: three steps to get accurate readings on the go within 1 second
  • To switch between Celsius and Fahrenheit, simply press the UNIT button. The value will be converted instantly, thanks to the pre-programmed algorithm.
  • The thermometer display will indicate whenever low on battery. It will automatically power off after inactivity of 60 seconds.
  • The ultra-compact design lets you slip it in your pocket, you can take it everywhere.
  • The VA invert display enables super-high static contrast ratios for impressive stunning visioning. Indoor or outdoor, you will get clear data reading from any angle.
  • All data is presented on the screen: no scrolling, no tapping!

Specifications:

  • Dimenions: 121x40x39.6mm
  • Weight: 75g
  • Operating Voltage: AAA battery x2
  • ORange: -40F-716F
vendor-unknown

SKYRC 380P INFRARED THERMOMETER

$39.95

Now you can take temperature measurements at a safe distance with SkyRC 380P, it provides accurate temperature readings from a safe distance, wherever indoor or outdoor.

SkyRC has engineered the 380P temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

Compared to its predecessor (ITP380), the 380P deploys a classic TO-46 housing thermopile sensor. The thermopile sensing element, composed of 116 elements of small thermocouples with an active area of diameter 545 μm on a silicon chip, absorb the energy and produce an output signal. It provides nearly Johnson-noise-limited performance, which can be calculated by its ohmic series resistance.

Every infrared thermometer has a "distance-to-spot" (D:S) ratio that tells you the diameter of the area being measured compared to the distance from the target.

The 380P thermometer has a distance-to-spot ratio of 6:1. That means it measures an approximately one-inch-diameter spot when it's 6 inches from the target (about 2.5 cm at 30 cm).

It means ITP380 thermometer can accurately measure targets at greater distances compared to many other thermometers; Distance-to-spot ratio is crucial to measuring! So be sure to measure at this D:S ratio.

Features:

Specifications:

View product