FLAT RATE SHIPPING * FREE DOMESTIC SHIPPING $499 & UP * Tel: 646.560.0909

vendor-unknown  |  SKU: 410-15-665

SKYRC RACINGSTAR PRO ELECTRONIC TIRE WARMER WITH WARMING BELTS

$109.95
Shipping calculated at checkout.



Description

Only for use with 1/10 scale rubber tires

The SkyRC tire warmer packs plenty of features to keep your tires sticky for the next race!

1. DC JACK

Located on the left side of the tire warmer is a standard DC jack for connecting power-lead.

2. XT60 CONNECTOR

Also located on the right side of the tire warmer is a secondary XT60 Connector. This jack is designed for powering the tire warmer with a 4S LiPo battery via XT60 connector. Battery or DC power source must be capable of delivering at least 8 amps while maintaining 12V DC.

Features:

  • Dual Power Source: 4S LiPo battery pack and 12-18V DC input.
  • Front & Rear temperature can be set independently
  • Temperature of 4 tires is controlled by MCU
  • Removable front & rear tire warmers
  • 8 different beep tones
  • Minimum temperature
  • Celsius - Fahrenheit selectable display
  • Four LED indicators
  • Safety timer

Intuitive User Interface

  • Large LCD Display Screen
  • Four choices Up, Down,Left,Right set with the Joystick.


Four LED indicators

  • The LED indicates red when the temperature of the tire warmers is warming.
  • The LED indicators turn green once finished

What’s in the Box

  • Tire Warmer Controller
  • Front Tire Warmer Cups
  • Rear Tire Warmer Cups
  • DC Input Cable
vendor-unknown

SKYRC RACINGSTAR PRO ELECTRONIC TIRE WARMER WITH WARMING BELTS

$109.95

Only for use with 1/10 scale rubber tires

The SkyRC tire warmer packs plenty of features to keep your tires sticky for the next race!

1. DC JACK

Located on the left side of the tire warmer is a standard DC jack for connecting power-lead.

2. XT60 CONNECTOR

Also located on the right side of the tire warmer is a secondary XT60 Connector. This jack is designed for powering the tire warmer with a 4S LiPo battery via XT60 connector. Battery or DC power source must be capable of delivering at least 8 amps while maintaining 12V DC.

Features:

Intuitive User Interface


Four LED indicators

What’s in the Box

View product