FLAT RATE SHIPPING * FREE DOMESTIC SHIPPING $499 & UP * Tel: 646.560.0909

MST  |  SKU: 532200

MST MXS-532200 RMX 2.5 S 1/10 RWD Electric Drift Car Kit (No Body)

$219.99
Shipping calculated at checkout.



Description

MXS-532200

The MST RMX 2.5 RS 1/10 RWD Electric Drift Car Kit offers a host of features drift enthusiasts want. The transmission allows either RMX or RRX style motor mount options. This gives the driver the option to choose upper or lower center of gravity positions as needed to suit the individuals needs. Two servo mounting positions are offered, with the option of choosing vertical or lateral servo mount positions to tune the weight bias. The servo mount positions bring with them two different battery mount options allowing for added weight adjustment. Combine this with multiple options for electronics placement and you have an incredibly tuneable chassis that can be setup in a variety of ways to suit various track conditions and driving styles.

In addition to the placement of the components, the RMX 2.5 S also features enhanced HT rear lower arms, an adjustable steering system for two-step Ackermann changes, threaded plastic shock bodies, a high level of roll center adjustment and much more. These features all combine to give you an incredible chassis that can run the wall with the best of the best.

NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.

Features:

  • Rear spur-gear-driving the gearbox can be adjusted between RMX and RRX drive modes
  • Two install methods of servo – vertical or lateral deployment
  • Plastic high rigidity constructions redesigned front steering suspension system 6 degrees KPI steering upright, and - 0.5 towing distance axle design
  • Inside rod fulcrum mount at the front upper arm features 10-step height adjustment and both side positions
  • Enhanced HT short rear lower arms
  • The fulcrum at the rear suspension upper rod is 5-step adjustable on both sides. The outer fulcrum is 4-step adjustable on both sides
  • Steel CVD axle of rear transmission system
  • Suitable for long and short battery
  • Full metal ball connectors
  • Standard realistic caliper and disc shape brake set
  • Standard ball differential
  • Full turnbuckles

Specifications:

Wheelbase: 257mm

Width: 190mm

Drive Mode: RWD
Hex to Hex Width: F178mm / R171mm

Caster: adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing

Damper: Hydraulic damper set

Needed to Complete:

  • Motor & ESC
  • 2 Channel Radio System (minimum)
  • Steering Servo
  • Battery & Charger
  • Drift Body
  • Drift Gyro
  • Drift Wheels
  • Drift Tires
  • Polycarbonate Paint for Body
MST

MST MXS-532200 RMX 2.5 S 1/10 RWD Electric Drift Car Kit (No Body)

$219.99

MXS-532200

The MST RMX 2.5 RS 1/10 RWD Electric Drift Car Kit offers a host of features drift enthusiasts want. The transmission allows either RMX or RRX style motor mount options. This gives the driver the option to choose upper or lower center of gravity positions as needed to suit the individuals needs. Two servo mounting positions are offered, with the option of choosing vertical or lateral servo mount positions to tune the weight bias. The servo mount positions bring with them two different battery mount options allowing for added weight adjustment. Combine this with multiple options for electronics placement and you have an incredibly tuneable chassis that can be setup in a variety of ways to suit various track conditions and driving styles.

In addition to the placement of the components, the RMX 2.5 S also features enhanced HT rear lower arms, an adjustable steering system for two-step Ackermann changes, threaded plastic shock bodies, a high level of roll center adjustment and much more. These features all combine to give you an incredible chassis that can run the wall with the best of the best.

NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.

Features:

Specifications:

Wheelbase: 257mm

Width: 190mm

Drive Mode: RWD
Hex to Hex Width: F178mm / R171mm

Caster: adjustable 6 / 8 / 10 / 12 degree

Bearing: Full ball bearing

Damper: Hydraulic damper set

Needed to Complete:

View product