FLAT RATE SHIPPING * FREE DOMESTIC SHIPPING $499 & UP * Tel: 646.560.0909

Island Hobby Nut  |  SKU: KYO40211T1

Kyosho KYO40211T1 Wave Chopper 2.0 Green, 1/6 Scale R/C Boat

$249.99
Los gastos de envío se calcularán al momento de pagar.



Descripción

KYO40211T1

Wave Chopper 2.0 Green, 1/6 Scale R/C Boat

Kyosho brings the fun back to the water with the revival of the Wave Chopper! To upgrade the new Wave Chopper 2.0 with modern RC technology and performance, a redesigned rudder, stern tube and motor mount in the 1/6th hull with new rider figure combine with the latest RC components. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. As both hull and rider are pre-assembled, simply install 4 X AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to start making a splash! The Wave Chopper 2.0 brings the fun of marine sports to everyone with this compact package!
Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance. Built in water intake channels water into the cooling jacket on the motor for effective cooling.
Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration.
Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss. High rigidity suspended motor mount maximizes drive efficiency and easy maintenance.
7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter. Simply install 4XAA batteries (Not included) into the transmitter and charge the battery, then this model can be enjoyed by anyone.

Readyset Contents
Fully assembled hull
Syncro KT231P+ transmitter
Injection molded boat stand
Pre painted figure
Hex wrenches 1.5 & 2.5mm
Spanner 4.0 & 5.5mm
Antenna tube
7.2V 2200 mAh Ni-MH battery and USB delta peak charger
PVC tape for waterproofing



Specifications:

  • Length 595mm
  • Width 220mm
  • Height 350mm
  • Transmitter KT-231P+
  • ESC KYOSHO SPEED HOUSE KA060-91W
  • Motor 550-class G14L motor with water-cooling jacket
Island Hobby Nut

Kyosho KYO40211T1 Wave Chopper 2.0 Green, 1/6 Scale R/C Boat

$249.99

KYO40211T1

Wave Chopper 2.0 Green, 1/6 Scale R/C Boat

Kyosho brings the fun back to the water with the revival of the Wave Chopper! To upgrade the new Wave Chopper 2.0 with modern RC technology and performance, a redesigned rudder, stern tube and motor mount in the 1/6th hull with new rider figure combine with the latest RC components. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. As both hull and rider are pre-assembled, simply install 4 X AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to start making a splash! The Wave Chopper 2.0 brings the fun of marine sports to everyone with this compact package!
Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance. Built in water intake channels water into the cooling jacket on the motor for effective cooling.
Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration.
Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss. High rigidity suspended motor mount maximizes drive efficiency and easy maintenance.
7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter. Simply install 4XAA batteries (Not included) into the transmitter and charge the battery, then this model can be enjoyed by anyone.

Readyset Contents
Fully assembled hull
Syncro KT231P+ transmitter
Injection molded boat stand
Pre painted figure
Hex wrenches 1.5 & 2.5mm
Spanner 4.0 & 5.5mm
Antenna tube
7.2V 2200 mAh Ni-MH battery and USB delta peak charger
PVC tape for waterproofing



Specifications:

Ver producto