FLAT RATE SHIPPING * FREE DOMESTIC SHIPPING $499 & UP * Tel: 646.560.0909

PROTEK  |  SKU: PTK-4550

ProTek RC PTK-4550 "SureStart" Professional 1/10 & 1/8 On-Road Starter Box

$71.99
Los gastos de envío se calcularán al momento de pagar.



Descripción

Starter Box Overview:

Introducing the ProTek R/C "SureStart" Professional 1/10 & 1/8 On-Road Starter Box: a potent, economical, and dependable companion for fuel on-road enthusiasts. Engineered to surpass expectations, this starter box effortlessly tackles tight engines, making it ideal for breaking in new ones. Equipped with high power - 775 size motor, the "SureStart" generates ample power to conquer even the most stubborn engines. Pre-installed T-Style connectors ensure a seamless, low-resistance connection from the get-go. Boasting high-quality 16awg silicone shielded wiring and quick-change connectors, maintenance is a breeze.

Its adaptable battery tray accommodates commonly used 7.2V NiMH or 7.4V LiPo packs, simplifying setup for users with existing batteries. With slight adjustments, the tray easily accommodates a 4S starter box pack. Offering convenience, the quick access cover release tab unveils the inner workings without requiring tools—just press and lift! Supported by the reputable ProTek R/C brand, the "SureStart" ensures nitro enthusiasts have a potent and budget-friendly solution that won't leave them stranded.

Features:

  • Fits 1/10 and 1/8 On-Road (1/10 Gas Truck)
  • Compact Size 13x4.25x2.50in (330.2x107.9x63.5mm)
  • 95% Assembled - just install chassis retaining tray and adjust holding pins
  • Adjustable chassis holding pins and sliding tray for fast and easy setup
  • Powerful 775 Motor
  • Factory installed T-Style connectors
  • Wiring and battery tray compatible with two 7.2V NiMH stick packs, or two 2S LiPo packs in series (batteries not included)
  • High quality 16awg Silicone wiring and quick change connectors allow fast repairs with no soldering necessary

Suggested Batteries:

  • (2) ECP-5011: EcoPower 6-Cell NiMH 2/3A Stick Battery w/T-Style (1600mAh)
  • (2) ECP-5110: EcoPower 2S 45C LiPo Battery w/T-Style (5000mAh)
  • *(1) ECP-4000: EcoPower 4S 20C LiPo Battery w/T-Style (2000mAh)
  • *(1) PTK-5101-22: ProTek R/C 4S 130C LiPo w/T-Style (4300mAh)

*Battery Note: The SureStart comes equipped with a Y-Harness power lead to accommodate either two 2S LiPo or two 6-Cell NiMH batteries. You can however use a single 4S LiPo battery to power the SureStart, BUT some modification is required - you will need to remove the Y-Harness power lead and re-solder a single T-Style connector to the power leads. 

PROTEK

ProTek RC PTK-4550 "SureStart" Professional 1/10 & 1/8 On-Road Starter Box

$71.99

Starter Box Overview:

Introducing the ProTek R/C "SureStart" Professional 1/10 & 1/8 On-Road Starter Box: a potent, economical, and dependable companion for fuel on-road enthusiasts. Engineered to surpass expectations, this starter box effortlessly tackles tight engines, making it ideal for breaking in new ones. Equipped with high power - 775 size motor, the "SureStart" generates ample power to conquer even the most stubborn engines. Pre-installed T-Style connectors ensure a seamless, low-resistance connection from the get-go. Boasting high-quality 16awg silicone shielded wiring and quick-change connectors, maintenance is a breeze.

Its adaptable battery tray accommodates commonly used 7.2V NiMH or 7.4V LiPo packs, simplifying setup for users with existing batteries. With slight adjustments, the tray easily accommodates a 4S starter box pack. Offering convenience, the quick access cover release tab unveils the inner workings without requiring tools—just press and lift! Supported by the reputable ProTek R/C brand, the "SureStart" ensures nitro enthusiasts have a potent and budget-friendly solution that won't leave them stranded.

Features:

Suggested Batteries:

*Battery Note: The SureStart comes equipped with a Y-Harness power lead to accommodate either two 2S LiPo or two 6-Cell NiMH batteries. You can however use a single 4S LiPo battery to power the SureStart, BUT some modification is required - you will need to remove the Y-Harness power lead and re-solder a single T-Style connector to the power leads. 

Ver producto