FLAT RATE SHIPPING * FREE DOMESTIC SHIPPING $499 & UP * Tel: 646.560.0909

GPM RACING  |  SKU : CC2023+12.5-OC

GPM RACING TAMIYA (CC-02) BRASS PENDULUM WHEEL KNUCKLE AXLE WEIGHT+12.5MM WIDER HEX+HARDEN STEEL #45 FRONT CVD JOINT+REAR DRIVE SHAFT -20PC SET cc2023-12-5

$66.90
Frais de livraison calculés lors du paiement.

COLOR


Description

Accessories:
Pendulum Wheel Weight-4PCS
Front CVD joint-2PCS
Rear drive shaft-2PCS
12.5mm wider hex-4PCS
Stainless Steel Pin 2x10-4PCS
4.0 E clips-4PCS

Product major functions & usage:
To increase the weight of each wheel to stabilize the wheel, enlarge the angle of crawling, especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level.

Major advantages of upgrading to this part/product :
1.This part is designed with a bearing in the middle with a delrin collar, the weight pendulum is made narrower on the top and wider at the bottom to allow the vehicle to crawl in different angles. The additional weight is kept downwards so the crawler is more grabby to the ground and able to crawl in a larger angle.
2. Extended length by 12mm to widen the wheel track in order to drive more stable and smooth.
3.Stub axle is 12.5mm wider than original
4. Weight of single pendulum + bearing : 119 grams

ORIGINAL COLOR
GPM RACING

GPM RACING TAMIYA (CC-02) BRASS PENDULUM WHEEL KNUCKLE AXLE WEIGHT+12.5MM WIDER HEX+HARDEN STEEL #45 FRONT CVD JOINT+REAR DRIVE SHAFT -20PC SET cc2023-12-5

$66.90

Accessories:
Pendulum Wheel Weight-4PCS
Front CVD joint-2PCS
Rear drive shaft-2PCS
12.5mm wider hex-4PCS
Stainless Steel Pin 2x10-4PCS
4.0 E clips-4PCS

Product major functions & usage:
To increase the weight of each wheel to stabilize the wheel, enlarge the angle of crawling, especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level.

Major advantages of upgrading to this part/product :
1.This part is designed with a bearing in the middle with a delrin collar, the weight pendulum is made narrower on the top and wider at the bottom to allow the vehicle to crawl in different angles. The additional weight is kept downwards so the crawler is more grabby to the ground and able to crawl in a larger angle.
2. Extended length by 12mm to widen the wheel track in order to drive more stable and smooth.
3.Stub axle is 12.5mm wider than original
4. Weight of single pendulum + bearing : 119 grams

COLOR

  • ORIGINAL COLOR
Voir le produit