Powerhobby 6s 22.2v 5000mah 100c Lipo Battery w EC5 Plug Hard Case 6-Cell

Powerhobby 6s 22.2v 5000mah 100c Lipo Battery w EC5 Plug Hard Case 6-Cell

100C Continous / 200C Brust

Description

The Powerhobby 6S 22.2V 5000mAh 100C LiPo Battery delivers high-output power, strong acceleration and dependable runtime for demanding RC applications. Its 5000mAh capacity provides extended operating time, while the high discharge rating supplies the current needed for powerful brushless systems.

With a 100C continuous discharge rate and up to a 200C burst rate, this battery provides consistent power during hard acceleration and other high-load conditions. Choose from soft-case or protective hard-case configurations with several connector options to match your model’s electronic speed control.

Available connectors include EC5, EC8, XT60, XT90, Deans and QS8. The EC8 soft-case and QS8 hard-case versions use heavy-duty 8 AWG wiring for high-current applications. Always verify the selected battery’s dimensions, case style, connector and 6S compatibility before installation.

Features

• 6S lithium-polymer battery
• 22.2V nominal voltage
• 5000mAh capacity
• 100C continuous discharge rate
• Up to 200C burst discharge rate
• Soft-case and hard-case options
• Multiple connector configurations
• JST-XH balance connector
• Strong and consistent power delivery
• Extended runtime
• Suitable for high-performance brushless systems
• Recommended charging rate up to 2C
• Brand new and factory sealed

General Specifications

• Battery Type: LiPo
• Cell Count: 6S / 6 Cell
• Nominal Voltage: 22.2V
• Fully Charged Voltage: 25.2V
• Capacity: 5000mAh
• Continuous Discharge Rate: 100C
• Maximum Burst Rate: 200C
• Balance Connector: JST-XH
• Suggested Charge Rate: Up to 2C

Soft-Case Specifications

• Length: 134mm
• Width: 43.5mm
• Height: 52.5mm
• Weight: Approximately 576g to 23.9 oz, depending on connector
• Case Type: Soft Case
• EC8 Version Wire: 8 AWG

Available Soft-Case Versions

• PHB6S5000100EC5 – EC5 Connector
• PHB6S5000100EC8 – EC8 Connector with 8 AWG Wire
• PHB6S5000100XT90 – XT90 Connector
• PHB6S5000100DNS – Deans/T Connector

Standard Hard-Case Specifications

• Length: 137.5mm
• Width: 45.5mm
• Height: 48mm
• Weight: Approximately 20.1 oz
• Case Type: Hard Case

Available Standard Hard-Case Versions

• PHB6S5000100EC5HC – EC5 Connector
• PHB6S5000100XT90HC – XT90 Connector
• PHB6S5000100DNSHC – Deans/T Connector
• PHB6S5000100XT60HC – XT60 Connector

QS8 Hard-Case Specifications

• Length: 138mm
• Width: 48mm
• Height: 48mm
• Weight: Approximately 22.5 oz
• Main Connector: QS8
• Main Wire: 8 AWG
• Case Type: Hard Case

Available QS8 Version

• PHB6S5000100QS8HC – QS8 Connector with 8 AWG Wire

Fits

• Compatible 1/10-scale RC cars, trucks and buggies
• Compatible 1/8-scale RC cars, trucks, buggies and truggies
• Select RC boats
• Select RC airplanes and helicopters
• Compatible drones and multirotors
• Other RC models designed for a 6S 22.2V LiPo battery

Fitment depends on the selected case style, battery dimensions and connector. Confirm that the battery will physically fit your model and that the electronic speed control supports a 6S LiPo battery before use.

Includes

• One Powerhobby 6S 22.2V 5000mAh 100C LiPo Battery in the selected case style and connector configuration

Warranty

This Powerhobby LiPo battery includes a six-month limited warranty from the original purchase date against defects in materials and workmanship.

The warranty does not cover:

• Physical or crash damage
• Damage caused by hard landings
• Improper installation or mounting
• Punctures, dents or battery deformation
• Overcharging or incorrect charger settings
• Deep discharging or operation below a safe voltage
• Excessive discharge current

Always inspect the battery before and after use. Stop using it immediately if it becomes swollen, punctured, unusually hot or physically damaged. Proof of purchase may be required for warranty service.